What to bring to the jobsite ?

Issue

What to bring to the jobsite ?

Answer

Please refer to the explanations below.

Explanation

There are two ways of correcting the GNSS data to go from raw GNSS accuracy (several meters) to corrected accuracy (just a few centimeters), for usage on the jobsite:

1. The first method Real Time Kinematic (RTK) uses localization based on network RTK. The DJI Phantom 4 RTK Drone has an internal network receiver where you can insert a sim card. 
2. The second method Post Processing Kinematic (PPK) uses localization 
   • based on a known point 
   • or uses the SC Edge as a RTK network receiver on the jobsite.